Sale!

Mercury 200L Pro XS – 200 HP 4-Stroke Outboard Motor, 20-Inch Shaft

Original price was: $11,800.00.Current price is: $8,700.00.

& Free Shipping
Specification Mercury 200L Pro XS
Brand Mercury Marine
Model 200L Pro XS
Engine type 4-stroke, naturally aspirated V8
Maximum output 200 HP (149 kW)
Displacement 4.6 L (4,572 cc)
Cylinder configuration 64-degree V8
Valves 32-valve DOHC
Bore × stroke 92 × 86 mm
Fuel system Computer-controlled EFI
Ignition SmartCraft PCM 112 digital inductive
Starting system Electric with SmartStart Protection
Full-throttle RPM range 5,600–6,200 RPM
Shaft length 20 inches (508 mm)
Steering Hydraulic standard; other options depend on configuration
Controls Mechanical remote or DTS, depending on model
Trim and tilt Power trim and tilt
Gear positions Forward – Neutral – Reverse
Gear ratio 1.75:1 or 1.85:1, depending on gearcase
Alternator 85A / 1,071W with Idle Charge
Cooling Water-cooled with thermostat
Lubrication Integrated wet sump
Oil capacity Approximately 6.6 L
Recommended fuel Regular unleaded, 87 AKI minimum
Dry weight Approximately 505 lb (229 kg), lightest configuration
Finish Phantom Black
Guaranteed Safe Checkout

Mercury 200L Pro XS – 200 HP 4-Stroke Outboard Motor, 20-Inch Shaft

Take your boating performance to the next level with the Mercury 200L Pro XS 200 HP 4-Stroke Outboard Motor, a powerful V8 marine engine developed for performance-focused anglers and recreational boat owners. Combining a 4.6-litre displacement with advanced electronic fuel injection, responsive acceleration and Mercury Pro XS engineering, this outboard delivers impressive power for compatible fishing and recreational vessels.

The Mercury 200L Pro XS features a 20-inch shaft, electric starting, remote controls and power trim and tilt. Its Phantom Black finish gives it a distinctive performance appearance, while its advanced engine-management technology supports responsive operation across a wide range of boating conditions.

Powerful 200 HP 4.6-Litre V8 Engine

At the heart of the Mercury 200L Pro XS is a naturally aspirated 4.6-litre V8 four-stroke engine with a 64-degree cylinder configuration, dual overhead camshafts (DOHC) and 32 valves.

This engine is designed to produce 200 horsepower, delivering strong acceleration and power for boats that require high-performance marine propulsion.

Its recommended full-throttle operating range is 5,600–6,200 RPM. The performance-tuned long-runner intake manifold is designed to support efficient airflow and responsive power delivery.

The V8 configuration provides a high-displacement platform for anglers and boat owners who want dependable power and strong performance on the water.

Advanced Electronic Fuel Injection

The Mercury 200L Pro XS uses computer-controlled electronic fuel injection (EFI) with Advanced Range Optimization. This system manages fuel delivery to support responsive acceleration, consistent operation and efficient fuel management.

Its SmartCraft PCM 112 digital inductive ignition system helps manage ignition performance, while Mercury’s engine-management technology supports smooth and controlled operation.

Together, these systems make the 200L Pro XS a modern performance outboard for demanding marine applications.

Electric Starting with SmartStart Protection

The Mercury 200L Pro XS features an electric starting system with SmartStart Protection for convenient engine starting.

The remote-control configuration allows the operator to start, control throttle and select gears from the boat’s helm. Depending on the exact model package, the engine can be configured with mechanical remote controls or digital throttle and shift (DTS).

This makes it important to confirm the control system and rigging requirements before purchasing.

20-Inch Shaft for Compatible Boats

This Mercury 200L Pro XS configuration uses a 20-inch long shaft, designed for boats with the appropriate transom height.

Selecting the correct shaft length is important for proper installation, water intake, propeller positioning and engine performance. Confirm your boat’s transom measurement and the manufacturer’s recommended installation requirements before ordering.

Performance Gearcase and Propeller Options

The Mercury 200 Pro XS platform is available with different gearcase configurations, including a 4.8-inch gearcase and TorqueMaster options on applicable 20-inch models.

The gear ratio depends on the selected gearcase. Certain configurations use a 1.85:1 ratio, while TorqueMaster versions use a 1.75:1 ratio.

These options allow the engine to be matched to different boat and performance requirements. Correct propeller selection is essential for achieving the recommended wide-open-throttle RPM range.

Power Trim and Tilt for Better Handling

The integrated power trim and tilt system allows the operator to adjust the engine angle from the boat’s controls.

Correct trim adjustment can help optimize acceleration, handling and running efficiency under different water and load conditions. The tilt function also makes raising the engine convenient when the boat is stored or when the motor needs to be lifted clear of the water.

High-Output Charging and SmartCraft Technology

The Mercury 200L Pro XS includes an 85-amp, 1,071-watt alternator with Idle Charge technology. This charging system helps support onboard electrical equipment and battery charging during operation.

SmartCraft compatibility provides access to engine information through compatible instruments and displays. Mercury Engine Guardian technology also provides engine monitoring and warning functions designed to alert the operator to certain operating conditions.

Key Features of the Mercury 200L Pro XS

  • 200 HP four-stroke outboard motor
  • 4.6-litre naturally aspirated V8 engine
  • 64-degree V8 cylinder configuration
  • 32-valve dual overhead camshaft (DOHC) design
  • Computer-controlled electronic fuel injection (EFI)
  • Advanced Range Optimization
  • Performance-tuned long-runner intake manifold
  • SmartCraft PCM 112 digital inductive ignition
  • Electric starting with SmartStart Protection
  • 20-inch long shaft
  • Remote mechanical or digital throttle and shift, depending on configuration
  • Hydraulic steering standard on applicable configurations
  • Power trim and tilt
  • 85-amp / 1,071-watt alternator with Idle Charge
  • SmartCraft compatibility
  • Engine Guardian protection technology
  • Phantom Black finish

Ideal Applications

The Mercury 200L Pro XS is designed for compatible performance fishing boats, bass boats and recreational vessels that require 200 HP of outboard power.

Its V8 engine, performance-oriented design and high-output charging system make it a strong option for boat owners who need responsive power and modern engine technology.

Always confirm your boat’s maximum horsepower rating, transom height, engine weight capacity, steering arrangement, control system and propeller compatibility before purchasing.

Why Choose the Mercury 200L Pro XS?

The Mercury 200L Pro XS combines a powerful 4.6-litre V8 engine with electronic fuel injection, electric starting, high-output charging and power trim and tilt.

Its 20-inch shaft configuration is suitable for compatible boats, while Mercury’s Pro XS engineering is designed to deliver performance for anglers and boaters who expect strong acceleration and responsive handling.

For boat owners looking to upgrade to a high-performance 200 HP outboard, the Mercury 200L Pro XS offers an impressive combination of V8 power and advanced marine technology.

Order Your Mercury 200L Pro XS Today

Upgrade your vessel with the Mercury 200L Pro XS 200 HP 4-Stroke Outboard Motor, 20-Inch Shaft.

Contact Ultimate Outboard Motor Engines to confirm the exact gearcase, steering and remote-control configuration, propeller requirements, availability and delivery arrangements before ordering.

Choose Mercury Pro XS V8 performance today and power your next adventure with 200 HP!

Reviews

There are no reviews yet.

Be the first to review “Mercury 200L Pro XS – 200 HP 4-Stroke Outboard Motor, 20-Inch Shaft”

Your email address will not be published. Required fields are marked *

Shopping Cart
Mercury 200L Pro XS – 200 HP 4-Stroke Outboard Motor, 20-Inch ShaftMercury 200L Pro XS – 200 HP 4-Stroke Outboard Motor, 20-Inch Shaft
Original price was: $11,800.00.Current price is: $8,700.00.
Scroll to Top